Electro Static Precipitators (ESP) are more suitable and highly efficient for collecting fine dust particles. Dust concentration from few grams to several hundred grams per m³ can be reduced to any desired concentration at the ESP outlet.

The ESP work on the principle of ionization of dust particles. The specific electrical resistivity of the dust is the important criteria in deciding the ESP size.

We offer complete range of ESP for the following area of applications:

Production Plants of Iron & Steel Industry

Production Plants for Cement Industry

Production plants in Chemical and Paper Industry.

A separate brochure of Electro Static Precipitator is available on request.

The Forced Draft Cooler is basically gas to air heat exchanger. These are specially suitable for Heat and mass transfer where water cannot be used economically as cooling media. This is particularly suitable for Sponge Iron Kilns.

Here the flue gases are made to pass over the tubes and fresh atmospheric air is passed through the tubes by FD Fans. The heat exchange takes place between the cooling media (Air) and the gas via convection. The flow of hot gases and the cooling media are perpendicular to each other to have maximum heat exchange efficiency.

The FD Cooler are made of multiple bank tube bundles stalked one over the other. The Hot flue gases enter the system at the top and after loosing its heat to the cooling media (Air) in the process, enter the dust collector (ESP or Bag Filters).

The dust particles in the flue gases are collected in the hopper mounted under the FD cooler and are discharged via Rotary Air Lock. The temperature of the Flue Gases coming out of the FD Cooler are monitored and controlled by injecting a small qty of bleeding air after the Cooler.

We have supplied these FD Coolers for several 50TPD and 100TPD sponge iron Plants.

Text will come Here! Text will come Here! Text will come Here! Text will come Here!